3 Ways To Solve Heat Transfer Film Printer Rubbing Paper?

Heat Transfer Film Printer belongs to a field of popular printers. Mainly used in cotton fabrics above the hot stamping printing. There are some customers of Heat Transfer Pet Film Printer will often appear rubbing paper. Today SUBLICOOL digital to share with you the DTF printer printing rubbing paper causes and solutions to the problem of rubbing paper.

1. Check whether the pressure sheet of DTF printer machine is loose

If the pressure sheet is loose or uneven, tighten the screws to solve the problem.

2. The copper bushing is loose, or the guide is more dry.

Propose to add a little lubricant to see. If it is not good, with structural adhesive to fix the copper sleeve does not move so that it does not fall.

3. The height of the car is too low

So, Printing cart and print paper spacing is too small. So rubbing paper to say the height of the cart down, generally in the height of a coin for the moderate.

If your DTF printing scuffing problems, usually check the above 3 items of hot stamping machine printing scuffing problems will be successfully resolved. At the same time, it should be noted that. If the printing deviation can be checked to wipe down the grating. And check whether the conveyor belt can be loose when walking, the equipment to keep clean is also very important.