📧 Email: sales@sublicool.com
Do you really know the technique of adding ink to a Pet Film Printer? Adding ink is one of the common operations. Some friends may think that adding ink is such a simple thing can have any skills. But how much ink left to add ink is the best? What should be paid attention to when adding ink to the ink cartridge? Do you really know? Do not know how to add ink can also lead to printer failure. Today SUBLICOOL digital hot stamping digital printing machine for you to share the process of adding ink need to pay attention to matters.
DTF digital printing machine to add ink to see whether the cartridge is intact. We can load the water test beforehand.
If you re-exchange the new ink should be the original cartridge thoroughly cleaned, otherwise it will occur two different ink mixing and chemical reaction, resulting in the phenomenon of clogging the nozzle.
Some customers in order to facilitate the use of the machine comes with the cleaning function, in fact, this is not good. It is best to wash a few times with water until you see clear water.
Change the ink must be the right amount, some customers in order to save trouble. Each time to add ink are added full. This will lead to DTF ink cartridges in the use of the phenomenon of leaking ink. And leaking out of the ink may be wet DTF digital printing machine inside the other parts, so as to damage the digital printing machine.
Do you really know the technique of adding ink to DTF digital printing machine? Adding ink also needs skills, the correct steps to add ink can make your printer to reduce the chances of failure, hurry up to learn it! This article is provided by SUBLICOOL digital, you can always consult us if you have any questions.
