Soft DTF Powder easy to melt, soft and smooth after transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts.
120-250um Rough DTF Powder
Rough DTF Powder easy to melt and suit for rough fabrics, such as denim, non-woven fabrics, and linen.
Stretch Resistant DTF Powder
Stretch Resistant DTF Powder very easy to melt, the transfer finished product is stretch-resistant, its really good for stretch fabrics.
Anti-sublimation DTF powder
Anti-sublimation DTF Powderis more suitable for Dark fabrics, White powder for Light ones. It is best to mix it with the standard white DTF powder to improve washability.
Highly Breathable DTF powder
Highly Breathable DTF Powder provides a more breathable print with a smooth feel and softness .
Recommendation:
When use the DTF holt melt powder, time and temperature will vary depending on the brand and model of the oven, heat press or heat gun used.
About Curing:
Oven - 200-230°F (90-110°C) for 2 to 3 min Heat press - Hover 1-2cm away at 356°F (180°C) for about 1 min.
About Transfer:
Heat press - 329°F (165°C) for about 10-15 seconds.
Request Hot Melt Powder Sample
Sublicool DTF print powder good for all kinds of fabric printing. If you are interesting, pls try a sample !
Our DTF print powder has a soft and stretchy feel and offers high adhesion. It will stick to the ink and not the film. The colors will turn out bright, vivid and waterproof.
GOOD STABILITY
Good chemical stability, can keep it at room temperature for a long time, don’t spoil. Harmless to human body, a green environmental protection products.
STRONG AND WASHABLE
Excellent washing fastness(can be washed up to 60 degrees water temperature)and dry cleaning fastness can be obtained under mild bonding conditions
GOOD ADHESION ANTI-SUBLIMATION
After curing,the tension is strong and flexible without breaking adhesion. It is best to mix it with the standard white DTF powder to improve washability.
Process to using the powder:
Print the image onto the matte side of film in mirror mode.
Apply Ecofreen hot melt powder evenly and remove the excess powder
Solidify the powder at 160C for about 2 minutes or until melted. At first it will become sparkling. Then it will melt and form a flat surface.
Transfer the image by heat press at 284°F for 15sec with medium pressure
Cold Peel (remove the film gently)
Applications:Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues
We Are Here to Assist You
Feel free to contact us or just drop us a line here. Our support stuff will reach you very soon.