High Tacky Sublimation Paper
Sticky coating sublimation transfer paper, It can suit for Lycra, Polyester. and Polyester with Spandex textile. Especially designed for elastic textiles.
Adequate stickiness on surface of transfer paper, removing the shadow effect, stable coupling of transfer paper and fabric, wide application for garments, accessories, signage etc.
The leval of tack depends on the fabric in use. Prior testing is required.
Enhanced tack-effect to work with a wide range of spandex textiles.
|PRODUCT||Tacky Sublimation Paper|
|WEIGTH||70GSM 80GSM 90GSM 100GSM|
|REGULAR WIDHT||24″ 36″ 44″ 60″ 63″64″ 72″|
|UNREGULAR WIDHT||16″50″ 54″ 61″|
|WIDER WIDHT||102″ 110″118″And etc.|
Specific depend on your Quantity
|APPLICATION||Textiles, Fabric, Mug, T-shirt, Ceramic, Glass, etc|
|SUITABLE FOR USE||EPSON, Mimaki, Roland, MUTOH, MS, A-Texo And ETC.|
|PRODUCT TIME||7 Working Days|
|SHIPMENT||LCL/FCL By Sea|
1.No ghosting and good drying time.
2.Maximum reduction of textile shrinkage can be achieved.
3.Enhanced tack-effect to work with a wide range of spandex textiles.
4.Enhanced tack between sublimation paper and fabric after transfer.
5.Sharp text and fine lines as there is no movement between paper and fabric.
The Step To Use Sublimation Paper:
Step 1: Create a design, make your design on the computer and mirror it before printing.
Step 2: Sublimation printing, only use an inkjet printer with sublimation ink to print on the white side of the sublimation paper.
Step 3: Wait for the image to dry, and preheat the fabric to remove wrinkles and moisture.
Step 4: Heat transfer, preheat the hot press to the temperature you set, adjust the pressing time appropriately, make the printed image face the fabric and start the pressing process.
Step 5: Remove the heat press and peel off the transfer paper.
Sublimation heat transfer paper has a special coating, allowing it to be used with Professional(Sublimation) inks. Special Coated Transfer Paper is used for metal, polyester fabric, polyester, spandex, icewire, woven fabrics, Lycra, Oxford cloth, and other synthetic materials, and blended fabrics(cotton containing not more than 30%). Suitable for mugs, ceramic plates, sports wear, mouse pads, pillow cases, advertisement flags and etc.
About Sublimation Printing
- Store the used sublimation paper at 68°F -82°F( 20°C -28°C) and 40-60% RH and dehumidification equipment in printing room.
- For the rollersublimationpaper, printing side is outward.
- Do test draw during the printing process to ensure the ink fluency
- Allow the printing ink to dry before transferring.
- For printing large areas of dark patterns,90-100 grams paper recommended.
- Open the heater and air-drying equipmentwhen do the winding.