For DTF printing, there are many factors that can affect the Pet Film Transfer Printing Machine effect. Only all aspects of good attention to print quality printing products, DTF printer process is very simple, in the printing process as long as attention to the following matters will be able to print quality printing patterns.
First, in the DTF machine, printing tasks must be printed before the test strip.
Printing test strips, in the case of checking that there is no broken line before you can print the picture. In the printing process should always check whether there is a broken line. If there is a broken line in the printing process, you need to re-clean the printhead before you can continue to perform the print job.
Second, regular maintenance of the DTF printing ink capsule
Every three months, clean or replace the ink capsule. So as to ensure the smoothness of the DTF machine printing.
Third, regular cleaning of the ink stack and scraper
Ink stacks and squeegees need to clean regularly, in order to prevent the DTF printer from the printing process of broken lines and the phenomenon of ink dumping. Please note that try to keep the digital printing machine clean and well-ventilated.
Fourth, temperature control
The temperature of the DTF printer workshop should be controlled at about 25 degrees Celsius. And you should control the humidity at 15% to 45%. Try not to touch the printing surface of the transfer paper with your hands. So as not to contaminate the paper, affecting the printing effect, and resulting in inferior products.
Fifth, environmental health control
DTF printer workshop must pay attention to maintaining cleanliness and hygiene. In order to avoid airborne dust, impurities contaminate the transfer paper, ink, and printer nozzle supplies. Thus causing harm to the digital printing machine.
Sixth, pay attention to the ink stock
Pay attention to the ink cartridges in the ink position of the high and low, never empty out the ink cartridges in the ink. The position of the ink in the ink cartridge can not be lower than the minimum scale line, resulting in broken lines. Add ink to the ink cartridge should also pay attention to, can not be higher than the highest mark of the ink cartridge. So as not to overpressure, resulting in the dumping of ink failure.
Conclusion
Overall, the pet film DTF printer for t-shirts needs to be used regularly. The working environment must be ventilated, and the temperature should be around 25 degrees, which are noteworthy points.
