SUBLIMATION

How to Correctly Maintain Textile Sublimation Printer?

textile sublimation printer

In order to ensure the best printing quality of our textile sublimation printer and prolong the service life of the equipment, please carry out daily and regular maintenance of the machine according to the following items. And you need to change the device-specified operation to complete.

Regular cleaning

  1. Squeezes: Wipe weekly.
  2. Guide to rail: wipe lubricant every week.
  3. Grating: Wipe with alcohol every 1–3 months.

4. Keep the surface of the printing platform clean

  1. The indoor temperature should be around 15-28.

Use and maintenance matters

  1. Do not touch the grating with your hands or sharp objects.
  2. Non-professionals are forbidden to dismantle the sprinkler head without permission
  3. Do not put your hands into the machine during the printing process
  4. No live work (such as plugging and unplugging print line, data line, etc.) during machine maintenance.
  5. Do not wipe the nozzle, ink can be sucked up with a dust-free cloth.
  6. It is best to remove static electricity with both hands or wear static bracelets during the sublimation printing process.
  7. The ink in the large ink bottle of the ink supply system should be kept at about 1/2 to 3/4.
  8. When moving forward or backward, do not hold down a key for a long time to enter or withdraw the paper. And the key should not exceed ten seconds, pause and press again.
  9. Pay attention to the cleanliness of the ink car, and the ink shall not splash on the date line.

10. The switching interval of the textile sublimation printer shall not be less than 6 seconds.

Sublimation paper printer cleaning

  1. When the outer surface of the machine is not clean, please wet the soft cloth with water or neutral detergent diluted with water, and wipe the surface of the machine after wringing it dry. You should not do not use gasoline, cleaning fluid, and other materials, easy to damage the surface of the machine cover.
  2. Use a soft brush, dry cloth, or paper towel to wipe off scraps of paper, fiber, or other similar substances in the air-suction holes and grooves of the printing platform.

Sublimation paper printer

Maintenance of moving parts

  1. Check the wear of the motor belt, trolley long belt, and paper motor belt, and adjust the belt tension appropriately.
  2. Clean the gray layer of the grating and the grating decoder, and gently wipe the dirty part with a soft cloth or paper towel dampened with alcohol.

Maintenance of sprinkler head and ink station

  1. Remove the maintenance cover on the left side of the ink sublimation printer, move the nozzle to this part, and clean the dirt around the nozzle surface with a soft cloth or paper towel dipped in the cleaning liquid.
  2. Pour a small amount of maintenance and cleaning liquid into the ink pad regularly. Choose automatic cleaning from the menu on the machine panel to clean the ink pump and waste ink tube.

Leave a Reply

Your email address will not be published. Required fields are marked *