📧 Email: sales@sublicool.com
DTF printer is a clothing printing machine that can DIY any pattern. This kind of DTF printer equipment has great requirements for the temperature and humidity in the air. Or it is a relatively delicate equipment. Careful maintenance is required during use, otherwise problems are prone to occur. Especially its nozzle. Because the precision requirements of the nozzle are high, it needs more attention when maintaining it than other accessories.
Today I will explain to you how to solve the problem of ink dripping and ink throwing in the DTF printer. Ink dripping and ink throwing in the nozzle is not necessarily a problem of the nozzle. It may also be caused by other accessories. SUBLICOOL Digital will analyze it for you.
The following points are likely to cause DTF printer ink dripping and DTF textile printing ink throwing failure:
-
Changes in ink morphology caused by too low or too high temperature in the DTF machine studio
Solution: Adjust the temperature of the studio to a suitable temperature, 20℃-35℃ is the best.
-
Because the nozzle has a slight ink blockage problem
A Solution: Use the machine’s automatic cleaning system to repeatedly clean the nozzle. If the problem cannot be solved, you can use the nozzle cleaning fluid for deep cleaning.
-
Due to the rupture of the pipe or ink sac
B Solution: If the fault is caused by the rupture of the pipe or ink sac, you only need to replace the ruptured pipe and ink sac to solve the problem.
-
Due to the quality of the ink
C Solution: If the purchased pet film transfer printing machine ink does not match the nozzle, or the fault is caused by the poor quality of the ink, then you can only replace the new ink.
-
Failure caused by the mobile trolley
Solution: If the mobile trolley is not stable when moving on the guide rail and shakes, causing ink dripping and ink throwing failure, you can only ask professional maintenance personnel to handle it.
