How To Deal With Pet Film Printer Downtime For More Than 48h?

Usually, double holidays, as well as holidays, long vacation, rest are more than 48 hours, Pet Film Printer does not work for a long time the ink will solidify, the printhead is not cleaned or not kept in a wet state will be prone to clogging the ink. long time DTF printers do not work is the need for good maintenance. Today SUBLICOOL digital to share a few small vacation maintenance DTF printer tips.

1. Before shutting down the machine, make sure that the nozzle of the DTF printer and the ink stack are tightly affixed and completely sealed.

It can effectively keep the nozzle moist and prevent the nozzle from clogging.

2. Clean up the waste DTF printing ink cartridge, use the clip to hold the waste ink cartridge

Tighten the cap connected to the ink supply port to prevent air from entering.

3. Cover the DTF printer with a dust cover to

Avoid dust pollution equipment, placed in a safe place, do a good job of fire, water, theft, rodent and insect prevention, to avoid damage to the equipment caused by non-normal causes.

Note: Before starting the pet transfer film printer after the end of the small holiday. You need to ensure that the printer’s working environment to achieve the optimal temperature and humidity. The specific temperature of 15 ℃ – 30 ℃, humidity of 35% – 65%. Double check the printer to ensure that all components are in place. After startup, print a nozzle test strip to check if the nozzles are normal before proceeding with the print job.