How To Maintain The Various Spare Parts Of Transfer Film Printer?

Transfer Film Printer equipment industry is also advancing with the times. Accompanied by the rapid development of science and technology, printing from the traditional process gradually to the digital process. The process from the complexity of the process to a simple.  DTF Transfer Film Printer has thousands of small parts to make up. Each accessory is indispensable to the existence of the parts, then how should we go to the maintenance of these parts?

1. DTF printhead

If slightly clogged, the use of ink cleaning function to carry out cleaning can be; when the nozzle clogging is serious. Tthe nozzle must take out and put into the cleaning fluid immersion cleaning. The actual immersion time based on the degree of clogging of the nozzle.

2. Grating bar

The grating strip is a small car frame after a transparent film, it plays a key role in accurate positioning. If the grating bar is dirty, there will be a heavy shadow, misalignment and other issues. And Should be carried out on time to clean the grating bar. Cleaning time to gently wipe with water, do not use brute force, both sides should be scrubbed.

3. Ink stack

DTF printing machine equipment applied for a period of time, scraper and ink pad will slowly stained with ink and dust. It will cause nozzle ink dripping or nozzle clogging and other phenomena. Therefore, it is necessary to use a cotton swab dipped in cleaning fluid to clean the ink stains and impurities on the squeegee and ink stack on time. If the scraper has deformed or broken, need to remove and replace the new scraper.