DTF.

How to Prevent Transfer Film Inkjet Printer Printhead Burnout?

We all know that the value and role of the printhead of the Transfer Film Inkjet Printer is very high. And the printhead is also an indispensable part of the operation of the DTF printing machine. Sometimes don’t know what reason nozzle burned out, make the operator is also very helpless. Especially in the process of dismantling the printhead is most likely to appear this phenomenon. So how to prevent the printhead of Heat Transfer Film Inkjet Printer from being burnt out, SUBLICOOL will explain it for you.

direct to film printer for t-shirts
direct to film printer for t-shirts

Points you especially need to pay attention to when installing

The DTF printer printhead should be powered off during installation. If the operation in the energized state is easy to rupture the printhead, after installation, gently push the trolley to move left and right to detect whether it is smooth. And if it is controllable, it means that the printhead has been installed in place. And only then can it be energized.

DTF printer for t-shirts
DTF printer for t-shirts

Check carefully and take protective measures

When the DTF pet film printer for t-shirts is energized, do not load ink for the time being. Wait until you have finished checking whether the contact is poor. Otherwise the printhead of the printer will be burned due to short circuit. The surface of the printhead of the Heat Transfer Film Inkjet Printer should be protected, do not collide, so as not to cause damage to the deformation. This will affect the normal work of the printer. At this time, you can add ink, the amount of ink, ink suction pump, cleaning tablets checked one by one. Note: Most of the nozzles in the initial installation of the inkjet printer have air in them, so it is necessary to first print a small sample chart to discharge the air, and then carry out normal printing work. If you find a broken line, you can perform a light cleaning.

Leave a Reply

Your email address will not be published. Required fields are marked *