📧 Email: sales@sublicool.com
Sublimation Transfer Ink is a core consumable in professional fields such as textile printing and gift customization. Its unique transfer characteristics require extremely high standards of operation. Improper storage, temperature control issues, or media mismatch can easily lead to problems such as printhead clogging, color differences, and image distortion, directly affecting production efficiency and finished product quality. Mastering the following key points can systematically avoid common risks and ensure stable and reliable output results.
Basic Standards: Proper Storage and Equipment Compatibility
Ink Storage Management
Sublimation ink is sensitive to light, heat, and moisture. When unopened, it must be stored in a cool, dark, and dry place, with a shelf life of typically 2 years. After opening, it must be sealed with a dedicated sealing cap and labeled with the date. It is recommended to use it within 1 year to prevent component volatilization or deterioration from affecting performance.
Equipment Compatibility and Maintenance
The printhead systems of different thermal sublimation printer models are closely related to ink compatibility. It is strongly recommended to use the ink model specified by the original manufacturer or explicitly compatible. Before using new ink, print a test page to check the ink output. If the equipment is planned to be idle for an extended period, thoroughly clean the printhead and perform a moisturizing procedure according to the instruction manual to prevent drying and clogging that could cause permanent damage.
Necessary Calibration Before Printing:
When changing ink batches or using the equipment for the first time, color calibration must be performed using the printer driver or professional software. Simultaneously, select the appropriate ink type based on the final transfer media (such as polyester fabric), which is a fundamental prerequisite for ensuring accurate color reproduction.
Key Strategies for Coping with High and Low Temperatures:
Key Points for High Temperature Environments:
High temperatures accelerate ink solvent evaporation, leading to changes in viscosity and pigment deposition, which can cause printhead clogging and color instability.
Storage: Must be stored in an air-conditioned room or a cool place, away from heat sources and direct sunlight.
Usage: Ink removed from a low-temperature environment should be allowed to stand for 10-15 minutes to reach room temperature before refilling the ink cartridge to avoid air bubbles caused by temperature differences. Maintain ventilation during printing, but avoid direct cold air blowing onto the printhead.
Key Points for Low-Temperature Environments：
Low temperatures significantly increase ink viscosity, leading to poor flowability, insufficient digital textile printing ink supply, and affecting color saturation and print continuity.
Storage: Ambient temperature should not be lower than 10℃. In northern winters, store indoors; never store in unheated areas.
Usage: Before use, allow the ink to warm up naturally at 20-25℃ for at least 2 hours. Do not heat directly with a heat source. Before printing, preheat the printer and run the printhead cleaning program 1-2 times. If the results are still unsatisfactory, reduce the printing speed appropriately.
