📧 Email: sales@sublicool.com
Using cleaning products with unknown ingredients Some users clean the DTF printhead surface with alcohol, dish soap, unidentified solvents, or ordinary paper towels. These substances contain high concentrations of volatile compounds or fibrous particles that can corrode nozzle electrodes, clog…
Pattern color is light/saturation is insufficient Check whether the ink stack has sufficient suction and whether the DTF printhead is tightly sealed. Check whether the nozzle has not been sealed for a long time, causing some nozzles to dry out.…
In daily DTF printing work, the Transfer Film Machine occasionally encounter the problem of nozzle ink blockage. Today, SUBLICOOL Digital will explain to you some improper operations when cleaning the nozzle. Incorrect operation will cause the nozzle to be damaged, thus…
Transfer Film Printer equipment industry is also advancing with the times. Accompanied by the rapid development of science and technology, printing from the traditional process gradually to the digital process. The process from the complexity of the process to a…
How important are good operating habits for Pet Transfer Film Printer for printing staff? Daily maintenance of good printing machine, a good habit can increase the service life of the printing machine this sentence also has some truth. Hot stamping…
When Pet Transfer Film Printer printing, the phenomenon of sudden ink breakage and simple damage to the printhead will be presented. Which is formed because of the instability of the printhead of the DTF printer. In fact, the onset of…
The chances that flying ink will occur during the printing process of a DTF T-shirt Printer are relatively small. If you follow the DTF printer safety manual to do a variety of maintenance measures, basically this problem will not occur. So…
As we all know, the printheads of Direct To Film Printer are relatively expensive and consumable that is prone to problems. A poorly handled will be very easy to block the ink phenomenon. In fact, the main reason is the…
The principle of the Transfer Film Printer is to set a good drawing from the printer after printing. After the machine sprinkled with a layer of hot melt powder. Through the dryer heating solid color, and finally, no need to…
It is very common for DTF Film Printing to have garbled codes in printing. A lot of improper operation can lead to DTF printer garbled code problems. And SUBLICOOL gives you the following some of the causes of garbled code…