📧 Email: sales@sublicool.com
As one of the inkjet printing devices, the DTF Inkjet Printer For T-shirts is just like our daily desktop printers. During the printing process, ink will be printed on the relevant media through the nozzle. However, after the ink dries and solidifies, it will be adsorbed on the medium.
At the same time, the ink remaining in the nozzle will easily cause nozzle blockage after solidification, which is what we often call nozzle blockage. We should pay more attention to nozzle maintenance to avoid nozzle blockage and nozzle damage that affect the normal use of the printer.
When we usually use DTF printers to print output, we may encounter problems such as ink breakage and nozzle blockage during the printing process.
For these common faults, SUBLICOOL digital printers will provide an automatic nozzle cleaning system. When we encounter ink blockage and ink breakage problems. We can solve the problem by starting the nozzle automatic cleaning system in time.
In order to better protect the nozzle, the DTF printer is equipped with a fully automatic nozzle cleaning system and automatic nozzle moisturizing when the printer is idle.
The nozzle moisturizing function basically depends on the ink stack. So when the printer completes the printing task, the nozzle must be returned to the ink stack. These two functions can effectively avoid nozzle blockage failures and reduce the frequent operation of printer operators.
The reason why DTF printer printheads are blocked is usually due to ink.
When the nozzle is exposed to the air for a long time, the ink in the nozzle hole will solidify and block the nozzle hole due to air drying, or because of the replacement of inferior ink with low fluency. The particles in the ink are large, which causes the nozzle hole to be blocked and causes the nozzle blockage.
Another reason is that the DTF heat transfer printer has been in a dusty space for a long time.
The large dust in the air will increase the risk of nozzle blockage. Because the nozzle of the nozzle is very small. We can’t see the existence of the nozzle with the naked eye, so you can imagine how small it is. However, because of this, the risk of the nozzle being blocked by dust will be greatly increased. Therefore, we generally do not recommend that customers place the processing plant in a dusty place.
