What Is The Truth About Heat Transfer Pet Film Printer?

Why should you buy a Heat Transfer Pet Film Printer? What are the reasons to choose dtf printers for your printing business.

1. Wide range of materials

Although DTF prints best on 100% cotton, it is actually suitable for many different garment materials: cotton, nylon, treated leather, and light and dark coloured fabrics. Transfers can even be applied to different types of surfaces such as luggage, shoes You can expand your inventory by applying your designs to a variety of items with DTF.

2. No pre-processing required

If you already own a DTG printer, you are probably familiar with the pre-treatment process (not to mention the drying time). The heat applied to DTF transfers bonds the print directly to the material, which means no pre-treatment is required!

3. Save on white DTF printing ink

While DTG printing requires 200% white, DTF requires less white ink – about 40% white. White ink tends to be the most expensive as it is used in larger quantities, so reducing the amount of white ink used when printing can result in significant savings.

4. More durable than DTG printing

There’s no denying that because the ink is applied directly to the garment. So DTG prints have a soft, almost tactile feel. While DTF prints don’t have the same soft feel as DTG, the transfer is more durable.

5. Faster production process

Because you can eliminate garment pretreatment and drying steps, you can significantly reduce production time. This is good news for traditionally unprofitable one-off or small orders.

7. Help your inventory become more diverse

While it may not be feasible to print a large number of your most popular designs in every garment size or colour. But with DTF printing, you can print popular designs in advance and stock them first. Then, once ordered direct transfer printing is fast.

About Consumables

To print successfully, you must purchase hot melt powder, ink, and DTF transfer film.

These are not identical, so you will need to do your research to find out what works best for your machine. Depending on the material, it will also change your ability to apply the transfer – hot tear, cold tear for example.

In addition to finding the best raw material for you, be aware that you may be plagued by mismatches in the raw materials you purchase. There are bad batches of hot melt powders, DTF films and even inks. This can lead to waste, and not just in terms of time. It can also result in wasted money if you are unable to return the product.