Why Can’t The Ink Of Transfer Film Printing Machine Be Mixed?

Friends who have a basic understanding of the Transfer Film Printing Machine know that the ink of this machine must not be mixed together. The ink formulas of different brands and even different batches are different! If two inks with different formulas are mixed together, it is very likely that the chemical components in the ink will conflict, produce new chemical reactions, and then damage the nozzle of the Transfer Film Printing Machine.

So everyone must pay attention to the following two points when changing inks, otherwise it is very likely to directly cause nozzle failure or even damage the nozzle.

1. Don’t add the wrong DTF Transfer ink:

Different types of DTF ink products have different ingredients. Mixing them together will change the color and quality of the ink. More seriously, it may cause the generated sediment to clog the nozzle. If you need to replace new ink, you need to clean the ink in the ink cartridge, ink tube, ink sac and nozzle and then add new ink for testing. Do not mix them together.

2. Don’t use inferior ink:

Inferior ink raw materials are of poor quality, color and quality are not up to standard, and there are more sediments. The ingredients in the ink are rough and the fluency is poor. Although inferior ink is cheaper, using inferior ink will affect the printing effect and clog the nozzle. If the nozzle is damaged due to the use of inferior ink, it will not be worth the loss.

CONCLUSION:

The nozzle is the core component of the DTF heat transfer printer. Once damaged, it can only be replaced. Because the price of the nozzle itself is not low, each replacement of the nozzle will be a considerable cost. Therefore, SUBLICOOL Digital DTF Printing recommends that customers understand and implement some daily nozzle maintenance methods. Which is very necessary for long-term use.