Why Does DTF Pet Film Printer’s Carriage Stop At Image Ends?

Today SUBLICOOL will explain to you why the ink carriage of a DTF Pet Film Printer pauses for several seconds at both ends of the image during the printing process. This problem usually only occurs in the early stage of the installation of a new device. Because this problem mainly occurs when connecting to a computer, if the computer you purchased has a low configuration. It is easy to have the problem of the DTF Pet Film Printer ink carriage pausing during printing. In fact, there are two reasons:

The first is that the computer’s computing speed cannot keep up with the transmission speed and printing speed.

In fact, in layman’s terms, the computer’s configuration cannot keep up with the printing speed of the DTF printer. Especially when the transmission speed cannot keep up with the printing speed when printing large images. Computers with low configurations are slow when transmitting data. And there will often be jams in transmission, causing the ink carriage to pause at both ends of the image. In this case, only by replacing a computer with a higher configuration can the problem be solved.

The second is that the network is too stuck and the speed of the optical fiber is too low, causing the DTF transfer ink carriage to pause at both ends of the image.

In general, we recommend that customers do not use wireless networks. But use optical fiber cables to connect directly to computers. In most cases, the network of optical fiber cables will be more stable than wireless networks. We recommend that you use a 100M or higher network cable to ensure that the data transmission process will not be stuck, thus ensuring the smoothness of the printing task.

Note: In general, the staff who install the heat transfer film inkjet printer equipment will help customers adjust the printing data to ensure the smoothness of the printing task. Customers should not replace new computer equipment at will!