Why Need Flash Spray of Pet Film Printer be Cleaned Frequently?

The most feared thing about the Pet Film Printer is dust and some liquids and other debris. Once the various accessories are not cleaned. There will be problems with line breakage, ink breakage or light and dark colors during printing. Therefore, the later maintenance of the DTF printing machine is very important. However some customers do not pay attention to it, which causes the printing machine to often have malfunctions. SUBLICOOL Digital has sorted out several precautions for later maintenance. I hope everyone can pay attention to it to avoid unnecessary losses.

1. When using, please ensure that the air humidity of the working environment of the DTF printing machine is not less than 70%,

The temperature is between 25-30 degrees. The airflow should not be too large and do not place this device in an environment exposed to the sun and dust.

2. Check the cleanliness of the flash spray and scraper of the printing machine for at least a week.

If there is hair-like debris. Please use tweezers or facial tissue to remove the debris to avoid printing failures caused by debris.

3. The DTF printing machine must be grounded.

Try to use thick copper wire on the screws connecting the two ends of the printer’s bracket to the host. The insulation on the surface of the copper wire should be removed. And the other end of the copper wire should be inserted into the ground at least 1 meter deep. Do not connect lightning rods, radiators, water pipes and other objects.

4. Do not put anything on the DTF printer.

There should be no commonly used household appliances. It should be kept away from large magnetic fields and electric fields to avoid signal interference.

5. The printer needs to print a test strip before working every day to see if the print head is printing normally. After finishing work every day, a test strip should also be printed, and all nozzles should be ensured to spray DTF printing ink normally before shutting down.

6. The machine room should be dust-proof and should not be placed together with machines that are prone to smoke and dust.